1.
Place the snow chain on the wheel so that the arms spread out in an x shape. Lay the chain on the tyres so that the cross touches the wheel rim.
|
 |
2.
Decide which wheel bolt is furthest to the right, looking at the rim head on.
|
 |
3.
Insert the fixing system washer to the bolt.
|
 |
4.
Hold the rod with the red knob on its end tightly pointing downwards. Fully tighten the hand wheel in a clockwise direction.
|
 |
5.
With one hand on the hand wheel and the other on the red knob. Turn the hand wheel and the rod together in a clockwise direction until the rod with the red knob on it is lined up with the centre of the wheel. Pull on the hand wheel to check it is right.
|
 |
6.
Attach the rubber tensioner on the yellow chain to the red hook on one of the arms.
|
 |
7.
Push the cross towards the centre so that the yellow chain runs on the red central block until it has no more than 3 links of chain.
|
 |
8.
Start the car, trak will automatically position itself around the tyre after few dozen meters. If you are in a car park or in a deep snow, move the car several times backward and forward a meter and if necessary push on the arm of the cross to help the trak chain rise.
|
 |